Details for Error code E16/0100
Cold solder joint - GPU
| Details | |
|---|---|
| Primary Error code: |  3 RLOD |
| E-Code / Secondary Error code: | E16 (No Audio/Video) / 0100 |
| Binary/Hex: | 00010000 / 0x10 -> 16 |
| Known fixes: | |
Related Errors: Powered by X-EX.com | |
| 0102 | |
| Description: | |
This error is a Cold solder joint under the GPU just like 0102, can be fixed with the X-Clamp replacement. | |
| References: | |
| Clicks: | 93868 |
Comments for this Error code:
0100 on slim then reflow /Reball xcpgpu if still the same then the xcgpu is
DEAD.
I got an Xbox 360 Slim with sub error 0100, I have first done a GPU reflow, but
still 0100 error, the I have reballed the GPU , nothing changed still the same
error, I have reflowed the rams still the same error...
Had an Xbox 360 Slim with corrosion on the main board. After cleaning the
corrosion from the board, this error popped. Reflowed the GPU. Now working
perfectly for a few hours now.
Hi, I have had 0020 on ram bricks, then I have swap the 2 SAMSUNG memories on
the left bottom side by HYNIX. That memory has another clock but works
perfectly. I have got a XBOX XENON with 3RLOD but working perfectly with 0100
error.
Copyright Information: Lately it has come to our attention that more and more people stole content from this Error code Database without giving credit, some also restricted access to this information and demanded a payment, we would like to point out that it is perfectly fine to republish content from XE on other sites, however we demand a link back to this error code database and the information must be freely and non commercially available, we appeal to those who feel addressed, add a link and respect the work of others, thank you...
Notice: None of this is official, the methods have often been proven to work but success cannot be guaranteed, you do it on your own risk!
If your console is still covered by the 3 year warranty use it because Microsoft will fix it for free!
A lot of the information you are getting here has been collected in the community, so thanks to everybody who shared his misery!