Details for Error code E80/1100

max1zzz on 2013-04-06 18:47:27 :

had one of these, the area around r3t6 was compleatley destroyed, u6t1 was gone
and 4 of it's pads where missing. Took the u6t2 chip off another board and
fitted it to this one then repaired 3 trace breaks and it booted ;) (but
unfortunatley it booted to a update loop of dash 13604, and with out knowing the
dvd drive vendor or key there is no getting out of that, and the console
wouldn't glitch [Damn xenons] so i'm gonna be putting a cpu from a
blades dash console on this one ;) )

max1zzz on 2013-04-06 18:47:12 :

had one of these, the area around r3t6 was compleatley destroyed, u6t1 was gone
and 4 of it's pads where missing. Took the u6t2 chip off another board and
fitted it to this one then repaired 3 trace breaks and it booted ;) (but
unfortunatley it booted to a update loop of dash 13604, and with out knowing the
dvd drive vendor or key there is no getting out of that, and the console
wouldn't glitch [Damn xenons] so i'm gonna be putting a cpu from a
blades dash console on this one ;) )

max1zzz on 2013-04-06 18:46:54 :

had one of these, the area around r3t6 was compleatley destroyed, u6t1 was gone
and 4 of it's pads where missing. Took the u6t2 chip off another board and
fitted it to this one then repaired 3 trace breaks and it booted ;) (but
unfortunatley it booted to a update loop of dash 13604, and with out knowing the
dvd drive vendor or key there is no getting out of that, and the console
wouldn't glitch [Damn xenons] so i'm gonna be putting a cpu from a
blades dash console on this one ;) )

flonk on 2012-01-12 18:44:35 :

I found that i have this error because i was knocked out U6T2 while dismantling
X-Clamp. Now i solder it back and i have Update Error...

holtvillejm on 2011-10-20 06:17:19 :

seve91 do you have detailed pictures of your work?

seve91 on 2011-02-20 15:11:41 :

Just solved the problem.I have removed for a mistake R1T6 instead of R3T6 and
the xbox doesn't boot up at all. If i press power button nothing happens.
So I've resoldered R1T6 and desoldered R3T6 for avoid efuses blowing.
The xbox boot up correctly, but when I've done an update it gaves me 1
RROD E80 1100.
So I've dissassembly again the console and replaced R3T6 again.
Unfortunatly I didn't have it anymore, so I've just soldered a 10K
resistor 1/4 watt using two little awg30 wires. Now the xbox boot up again and
it is finishing the update :)

gdwrnch29 on 2010-03-31 15:16:45 :

Just curious as to why people always comment on what they're going to do,
but never come back and post a comment as to whether it worked or not? Without
that, these comments aren't much help.

gdwrnch29 on 2010-03-31 15:06:28 :

Just curious as to why people always comment on what they're going to do,
but never come back and post a comment as to whether it worked or not? Without
that, these comments aren't much help.

ianleblanc on 2009-11-17 17:59:50 :

wow... CR6T1 (right beside R6T3) is sodered on wrong - almost sideways and looks
like a lifted lead... this is probably whats causing my error.

I am going to resoder and see if E80 / sometimes 3 RROD go away

(Microsoft needs to fire some tech and get people in that can soder properly.)

ianleblanc on 2009-11-17 16:50:01 :

I got this error on an unmodded xbox. The box has been sent to microsoft once
for RROD fix. This time I got it after doing the xclamp fix.

Going to disassemble and check the R3T6 resistor and possibly resoder if it
looks to have a cold soder joint.