Details for Error code E71/1013
Dashboard update error (NAND related)

Details | |
---|---|
Primary Error code: | ![]() |
E-Code / Secondary Error code: | E71 / 1013 |
Binary/Hex: | 01000111 / 0x47 -> 71 |
Known fixes: | |
1) Patch for the fall update(search on Google for it)/ Insert the NXE Update disc before the error screen pops up | |
Related Errors: Powered by X-EX.com | |
No Related Errors available! | |
Description: | |
This error is related to a failed dashboard update, can also be NAND related if you have an Infectus chip.... | |
References: | |
No References available! | |
Clicks: | 111847 |
Comments for this Error code:
I got this secnario... When the Xbox 360 tries to execute some bytes of whatever
and whatever it tried to execute crashes without returning a distinct error code
(such as E63 or E74), it displays E71 on the screen. Whatever the Xbox 360 tries
to execute does not necessarily have to be valid XEX code for E71 to be
displayed, but it has to be valid (and signed, if not on modified Xbox 360) for
E71 to not be displayed.
(JTAG'd/Glitched boxes)
Caused by having a default.xex on the root of the HDD
I have had the E71 error message for about 2 weeks now, it would not let me go
to dashboard to often before, one day when i did get on dashboard I formatted my
HDD, & inital setup. Also sync+power on to clear failed updates. Ever since
I did that, I can no get onto dashboard anytime, just cant play games or recover
my gamertag without getting e71. Could this be a problem with the southbridge
chip? It let me update after formating the HDD, so i'm not sure how it
would have anything to do with the updates.. Please help
had this error 3 times(3 boxes) tried re-flowing hana sb nothing re flowed gpu 2
of them worked had a stubborn one re-flowed gpu couldn't fix so i added
shim and screw set under gpu as last resort added 2 washers on 3 on top then 1
on 4th screw played around with the tighten each one loosen so on boom it worked
just repaired a console with this error code. reflowed the southbridge, and did
the hybrid xclamp fix and it seems to be working fine now
just repaired a console with this error code. reflowed the southbridge, and did
the hybrid xclamp fix and it seems to be working fine now
I have found that every time this error occours on Falcon models after writing
XBR.bin to the NAND. With or without J-Tag installed. If you ONLY inject the
keyvault block and NOT the config block into your XBR.bin image then write the
XBR.bin image back to the NAND with only the kv.bin injected and enjoy your
J-Tag. Works every time for me.
This error WILL show if you have any usb media with a default.xex file on the
root of the drive and will show with or without any J-Tag modifications.
tried to insert nxe disc but xbox wont update with the same update again. did a
reflow. did the sb xclamp fix..Im stuck. any ideas?
Copyright Information: Lately it has come to our attention that more and more people stole content from this Error code Database without giving credit, some also restricted access to this information and demanded a payment, we would like to point out that it is perfectly fine to republish content from XE on other sites, however we demand a link back to this error code database and the information must be freely and non commercially available, we appeal to those who feel addressed, add a link and respect the work of others, thank you...
Notice: None of this is official, the methods have often been proven to work but success cannot be guaranteed, you do it on your own risk!
If your console is still covered by the 3 year warranty use it because Microsoft will fix it for free!
A lot of the information you are getting here has been collected in the community, so thanks to everybody who shared his misery!