Details for Error code E17/0101
USB port (bridged pins)
| Details | |
|---|---|
| Primary Error code: |  3 RLOD |
| E-Code / Secondary Error code: | E17 (No Audio/Video) / 0101 |
| Binary/Hex: | 00010001 / 0x11 -> 17 |
| Known fixes: | |
1) Unplug all USB devices that might be connected to your 360 | |
Related Errors: Powered by X-EX.com | |
| No Related Errors available! | |
| Description: | |
This error is caused by bridged solder joints under the USB ports or a defective USB device that is connected to it. | |
| References: | |
| Clicks: | 129848 |
Comments for this Error code:
Yes i need a solution please. error 0101 In corona board i'll try reflow
ram and XGPU But not still working and change a little components bottom USB
Port but same no works
i'll try For reflowing SB but still no respon , and i try another way (
reballing ) still error 0101 Anyone have good solution ??
Just confirmed 0101 is southbridge on Xbox 360 slim. The southbridge is the only
chip I reflowed. Fired up with no problems. Thanks to all those who post with
helpful infotmation.
This may seem odd, but I had a 0101 on a Zephyr that seemed to be caused by an
overheated CPU. Whoever had the console before let the console run without a
heat sync on the CPU. You could tell from the thermal paste being discolored and
a different texture. Lifted bad CPU with a Scotle IR360 Pro V1 and reattached a
new CPU. Problem solved! [Note: do your research on CPU swapping before
attempting]
ok first I replaced XCLAMP. No joy. Then I stuck in USB male plug into the
ports. Xbox launched. It is the USB port. My assumption was that the inside
pins were touching causing the short. That was easy.Finally an easy fix.!!!
XBOX ELITE. rarely used before 3 ROD. Front USB PORT.
Xbox 360 Slim, PCB Corona, Red Power, code error: 0101. HELP ME :( Reballing
CPU/GPU and SB did not help :((( after 10 seconds the red light appears. : (((
Slim 360 came in occasionally throwing this error. Plugging anything into the
front or back ports froze the system. Reflowed Southbridge. Error no longer
present.
I got 0102, reflowed ram and GPU, accidentally my xenon board was droped on the
floor so i didn know if something loosed or broken, turned on, 0101, no solder
bridged under USB ports, but inserted an USB conector a couple of times into
every USB port so I could feel if something is bridginfg inside,seemed ok, tried
again an NOW WORKIN. Just my experience, I was exeptical before. Good luck.
I took off all the USB ports from the mobo and it didnt help...
I'm gonna try reball the SB.
and then the GPU.
had one of these today. usb port had bridge solder. removed it and tada it
worked again
Copyright Information: Lately it has come to our attention that more and more people stole content from this Error code Database without giving credit, some also restricted access to this information and demanded a payment, we would like to point out that it is perfectly fine to republish content from XE on other sites, however we demand a link back to this error code database and the information must be freely and non commercially available, we appeal to those who feel addressed, add a link and respect the work of others, thank you...
Notice: None of this is official, the methods have often been proven to work but success cannot be guaranteed, you do it on your own risk!
If your console is still covered by the 3 year warranty use it because Microsoft will fix it for free!
A lot of the information you are getting here has been collected in the community, so thanks to everybody who shared his misery!